US Amateur Band Plan app
Available for Android and iOS
Get the app

← Band plan

6 mm band

Privileges
4747.2 GHz
E, G, T
Legend
Data, RTTY, and CW
Phone, image, and CW
Typical phone mode
FM, USB
These mode(s) are commonly used for voice on this band. Most bands allow other modes, as well (see restrictions).
Restrictions
On the 6 mm band, a RTTY, data or multiplexed emission using a specified digital code listed in §97.309(a) of this part or an unspecified digital code under the limitations listed in §97.309(b) of this part may be transmitted.
§97.307(f)(7) and §97.305(c)
The 5-unit, start-stop, International Telegraph Alphabet No. 2, code defined in ITU-T Recommendation F.1, Division C (commonly known as "Baudot"); The 7-unit code specified in ITU-R Recommendations M.476-5 and M.625-3 (commonly known as "AMTOR"); The 7-unit, International Alphabet No. 5, code defined in IT--T Recommendation T.50 (commonly known as "ASCII"); An amateur station transmitting a RTTY or data emission using a digital code specified in this paragraph may use any technique whose technical characteristics have been documented publicly, such as CLOVER, G-TOR, or PacTOR, for the purpose of facilitating communications.
§97.309(a)
On the 6 mm band, a station may transmit a RTTY or data emission using an unspecified digital code, except to a station in a country with which the United States does not have an agreement permitting the code to be used. RTTY and data emissions using unspecified digital codes must not be transmitted for the purpose of obscuring the meaning of any communication. When deemed necessary by a District Director to assure compliance with the FCC Rules, a station must: Cease the transmission using the unspecified digital code; Restrict transmissions of any digital code to the extent instructed; Maintain a record, convertible to the original information, of all digital communications transmitted.
§97.309(b)
Amateur stations on the 6 mm band may transmit a RTTY or data emission having designators with A, B, C, D, E, F, G, H, J or R as the first symbol; 1, 2, 7, 9 or X as the second symbol; and D or W as the third symbol is also authorized.
§97.307(f)(8) and §97.305(c)
Spread spectrum emissions are authorized on the 6 mm band with a maximum of 10 W PEP.
§97.305(c) and §97.313(h)
MCW emissions may be transmitted on the 6 mm band.
§97.305(c)
Test emissions may be transmitted on the 6 mm band.
§97.305(c)
Pulse emissions may be transmitted on the 6 mm band.
§97.305(c)